How to Wash Your Bike Like a Pro

By January 10, 2017Bike

Working smoothly and look sharp is an imperative part to being a bike owner and cyclist. Worried your cleaning methods may not be up to standard? No worries, Bicycling Magazine has you covered:

What You Need
Round up these everyday household items to clean your bike:

  1. Clean shop rags or old cotton T-shirts
  2. Dummy axle
  3. Scrub brushes
  4. Bucket
  5. Repair stand or taut clothesline
  6. Garden hose with trigger-style spray nozzle
  7. Chain lube
  8. Two-sided abrasive sponges
  9. Dish detergent

The Setup
1. Fill two clean buckets with water and a generous squirt of dish soap. (Mike likes Dawn Ultra.)
2. Lay out your brushes, sponges, and rags.
3. Place your bike in a workstand. This brings it up off the ground and makes all the nooks and crannies easier to reach. No workstand? Try hooking the nose of your saddle over a taut clothesline.

The Wash

  1. Remove your wheels and insert a dummy axle, or a chain keeper. “I like to insert a chain keeper [a guide for your chain when the cassetteis removed] to keep tension on the drivetrain,” Mike says. It’s fine to skip this step if you don’t want to spring for the tool, but using one prevents the chain from folding up on itself or falling off the bike when you try to work on it. Trust us, it’s annoying.
  2. Rinse the frame and components.
  3. If the chain is still grimy, apply small drops of dish soap like you would a lube, grip the chain in the rough side of your sponge, then turn the cranks for several rotations. Let it sit for five minutes, and rinse.
  4. Scrub the derailleurs, chain, and chainrings with a stiff-bristled brush. “Use a bottle brush or toothbrush to get into crevices around the teeth, pulleys, and rings,” Mike says. Rinse with a gentle stream of water and repeat if you still see any lingering crud.
  5. With a clean, soft sponge dipped into your second (fresh) bucket, soap up the frame, working your way from front to back. “Be methodical so you remember what you’ve done,” Mike says. Rinse.
  6. Clean your brake calipers, bottom bracket, rear dropouts, and under your fork. Clean brake pads with the abrasive side of the sponge.
  7. Rinse the frame with a light spray.
  8. Grab your rear wheel, drip dish soap onto the cassette, scrub with a brush (dunked in the bucket you used to clean your frame), then rinse. Repeat if necessary.
  9. Wash your wheels. Starting at the valve, scrub all the way around the wheel, hit the spokes and hub, then flip the wheel to get the opposite side. Scrub your tires. “I use softer and bigger brushes for tires and rims so they get into crevices with less effort,” Mike says. (If you have disc brakes, use the soft side of a clean sponge with soap and water on rotors.)
  10. Gently rinse your wheels and reinstall. Spin the cranks to make sure the drivetrain runs smoothly.
  11. Wipe everything down with a dry cloth or let it air-dry in the sun.
  12. Lube your chain.

Click HERE to see and read more.

Leave a Reply